Why am I happy I became an instructor? I made my first scuba dive in 1977. I became an instructor in 2017… some might say it was about time 🙂
I became interested in scuba diving at a very young age… I was about 10 years old when I discovered the old television series Sea Hunt with Lloyd Bridges. I used to rush home from school every day to watch re-runs (Sea Hunt actually started filming before I was born and was in re-runs by the time I discovered it). Living in a small Texas city at that time, far from the ocean, I was fascinated.
Watching Sea Hunt had me looking for books on diving at the library. I’ve had a life-long love of reading and I’m prone to look for a book whenever I’m curious about something. One of the first books I found was “Silent World” by Jacques Cousteau who became one of my early inspirations. When I was 13 and just out of 7th grade I was in Corpus Christi with my father. As we were driving I saw my first dive shop (Copelands one of the oldest dive shops in Texas I later discovered) and convinced him to stop. I used money I had earned working in my dad’s warehouse that summer to buy a set of snorkeling gear. It was Scubapro and the first quality set I owned. Much better than the cheap plastic drugstore variety! When I returned home to Bryan I found a “skin diving” course being offered at the municipal pool and talked my mom into taking me. That first scuba dive happened later in Virginia, my first year in the Navy.
Looking back at my IDC (Instructor Development Course) and time I spent at Dive Oahu in Hawaii, I have to admit it was a hectic period of time. We started with Assistant Instructor the first half of the course and then moved on too Instructor which was more practice! Successful completion of the course requires an in-depth understanding of everything! The PADI teaching method, standards and practices, dive theory, rescue, practical application and demonstration of diving skills. It was an intense experience to say the least!
I have to say even though I’ve been diving a long time, it was a bit challenging at times. I remember one day in particular that was not a fun day! We did a beach entry through what I considered (still adjusting to Hawaii and I’m not as young as I once was) to be fairly heavy surf. This was followed by a surface swim out a good 300 yards. We presented the skills we’d been assigned to teach. We were doing makeups so we had 4 skills in all to present. Some at the surface and some that we taught underwater. Everyone took turns. We had a bit of current that wanted to push us south and there was surge to deal with as well. We were in the water a good 3 hours (obviously not underwater the whole time).
After we’d all finished teaching our assigned skills, then it was time for rescue practice which we practiced on every open water training dive we did throughout the IDC. Rescue practice consists of keeping someone afloat while removing all of their equipment and your own, all the while doing rescue breaths every 5 seconds. Did I mention there was a current?
By the time we headed back in I was exhausted and frankly not in the best of moods… then out of the blue, I came face to face with a sea turtle! He went right and I went left as we passed each other. At the moment I saw him my mood was lifted and I thought to myself how cool that was! 🙂
My biggest concern and probably a big reason why I never became an instructor all these years was that I might somehow lose that feeling… the feeling of joy, the feeling of adventure, that feeling I get when I see something amazing, whether it’s a new nudibranch species, or a shark, or a turtle… Those who dive know that feeling 🙂
Why am I happy that I became an instructor? Because now I get to share that feeling with others and THAT is even cooler! 🙂
I realize that it’s been several months now since I last posted. Being a full-time college student has frankly been a bit of a bear at times 😀 I’ve also still taught the occasional scuba course and of course I still want to do some fun diving 🙂 So, picking up where I left off….
During the 5 week break from school I made 23 dives. A mixture of shore and boat dives. I’ve made close to a 160 dives (my largest single year total to date) in Guam since moving here last year. That total would have been much higher if I’d not gone back to school last August. I will get to writing about the diving in Guam here eventually 🙂
I went back to school on January 23rd. On February 16th I made my last dive with Colin Ross. We did one of my favorite dives here, the Kitsugawa Maru, a WW II Japanese wreck in Apra Harbor. Colin was one of my first students in Guam. He and his wife Virginia did their Open Water with me last year. Colin went on to do Advanced Open Water, Enriched Air, and Wreck Diver. He, along with Joe Seremba and Jayson Trucksees, was one of my regular dive buddies here for fun dives last year when I wasn’t busy with school or teaching. Colin’s in Navy Dive School in Florida now.
I went to the Philippines and dived Puerto Galera during spring break the last week of March. My friend Joe Seremba from here on Guam came along. Joe has done his Open Water, Advanced Open Water, and Enriched Air with me. We met my friend Ron Brannan from California who was on his annual dive trip to the Philippines. Ron and I have been diving together in the Philippines for a few years now. We met in 2016. Last year he was my first “official” student after becoming an instructor. Ron completed his Advanced Open Water and Enriched Air with me last February. He’d done over 200 dives by the time he got around to doing Advanced Open Water. He figured it was about time 😉 It had been over a year since I’d last dived in the Philippines and I discovered how much I missed it! We stayed at AAA again and dived with Frontier Scuba.
I’ve not done a lot of teaching this year (too busy with school) but I have worked in a few classes. So far this year I’ve done only six certifications… Cynthia Mulliner earned her Advanced Open Water cert and Kasia Merline and Joe Seremba both earned Enriched Air certs. They were all certified in April. In May, Amanda and Daniel Perez who were visiting Guam from Virginia (actually Amanda was here for work and Daniel came out to spend some time with her) completed their Open Water certs. Anne Freeby completed the requirements for Scuba Diver.
On May 11th before heading over to meet Amanda, Daniel, and Anne at MDA I participated in the 3rd Annual Merizo Pier Project. This is an annual event that conducts an underwater cleanup of the reef around the Merizo Pier here on Guam. Jayson Trucksess, who did his Advanced Open Water and Enriched Air courses with me last year was my buddy. We were there early and were part of the first group of divers to hit the water. It was my first time diving at Merizo and it was a nice dive. Plenty of coral and fish. We recovered the usual assortment of fishing line, cans, bottles, and other assorted trash that we see all too often these days.
After a busy weekend, I had my last week of classes at UOG. Final exams were the 20th to the 22nd. My second semester back in school ended up being a bit harder. I struggled early with Biology I. Turns out there is a fair amount of chemistry that is part of the study of biology. Not having had high school chemistry (which would have been over 40 years ago anyway) hurt. In the end I ended up with a C. On the bright side I made an A in World Regional Geography (I’ve added a Geography minor to my degree plan) and an A+ in Marine Biology so it wasn’t all bad 🙂
After finishing the semester I made my second trip this year to the Philippines with my friend Joe Seremba. We arrived in Olongapo on May 24th and spent a week diving Subic Bay. My last time diving Subic I gave Arizona a shot but I’m back diving with Johan’s again. Johan has built a brand-new resort just down the beach from his previous resort on Baloy Long Beach. I do like Johan’s a lot. I like the atmosphere and the people there 🙂 My past several trips to Subic I’ve stayed at Coffee Shop Rooftop Hotel in Barangay Barretto which is across the street from Arizona Dive Resort. They were full this time (first time that has ever happened) and we ended up staying at Arizona for 2 nights. This was my first time staying at Arizona and frankly I thought the rooms were overpriced. I’ve stayed in nicer places in the area for much less money. Having said that, I still like their restaurant and have nothing bad to say about their dive operation.
We arrived back on Guam on June 2nd. On the evening of June 3rd I went to the Navy Hospital here on Guam when I started feeling chest and back pain with numbness radiating down my left arm. It was no where near as bad as what I felt in Singapore two and a half years ago but it felt enough like it that I decided better safe than sorry.
They treated it as a heart attack and administered drugs accordingly. Symptoms (pain in chest and back, pain and numbness radiating down left arm, shortness of breath) were relieved fairly quickly. The symptoms are very similar for heart attack and angina. We thought initially when I recovered so quickly, that it wasn’t a heart attack. That turned out not to be the case.
They did a blood test for cardiac-specific troponin levels which is used to detect injury to the heart muscle. Initially it was negative but they kept me for 3 hours so they could run the test again as it can take that long to show up in a blood test after initial symptoms appear. When the second test came back positive I was kept in the hospital.
My echocardiogram showed a reduction in my ejection fraction. Ejection fraction refers to how well my heart is pumping blood. Other than that my heart continues to more or less function normally. I have a normal EKG and am not suffering from any kind of irregular heartbeat. I’ve never had high blood pressure.
I was kept in the hospital until Thursday morning when they let me go home. I had a follow-up last week on Tuesday with my Primary Care Manager. I met with my new cardiologist here on Guam this week on Monday. I’m scheduled for an angiogram next week and we’ll be able to see exactly what is going on. The damage was relatively minor based on the lab results. Depending on what the angiogram shows I may be cleared to dive as soon as next week… Just have to wait and see at this point.
In the meantime I’m staying at home and taking it easy. I decided I would work on my blog a bit since it’s been so long 🙂 I have a post on choosing a BCD (which I mentioned in my last blog post back in January) mostly written (it’s been mostly written for 6 months 😀 ). I may work on some more posts in my “Choosing Equipment” series and I do need to write about some of the diving on Guam 🙂
You’re never too old they say and I’ve lived my life that way long enough to know it’s actually true. As I promised in my last blog piece, let me catch everyone up (who doesn’t follow me on Facebook) with what I’ve been doing. I’ve been incredibly busy, but have to say that I’m having fun (no surprise to my friends who know I always like to have fun 😉 ). In August 2018, I went back to college (for the first time in quite a while) at the University of Guam.
I jumped in with both feet and took 16 semester hours my first semester back in school. By some estimates that’s the equivalent of working a 50-60 hour a week job (2-3 hours of study time for every hour in class). This semester I worked on some general education requirements. I completed courses in Math, Geography, Environmental Biology, Critical Thinking, and Literature. I completed requirements for English Composition, Speech, Psychology, Economics, and U.S. Government the last time I was a full-time college student. I finished the semester with a 3.769 GPA… enough for the Deans List 🙂
Another reason for being so busy was that I continued teaching the occasional scuba course on the side although not as many due to my class load. I was so busy with school that even that stopped and I ended up not diving at all during the last month of the semester! Some of this I think was self-inflicted as I was trying to figure out how to best organize my time to accomplish everything. I found that I’d gotten a bit rusty with time management since I retired 🙂
The next semester will be starting January 23rd. I’ll be taking Introductory Algebra (still catching up in math), Principles of Biology I, Marine Biology, and another Geography course. I’m currently a Biology major, but I’m looking at transferring to a school where I can major in Marine Biology. Although the University of Guam has a well regarded Marine Laboratory that attracts graduate students from all over the world, they do not (a bit surprisingly) have a Marine Biology degree program. The top of my list at the moment is Texas A&M-Galveston which is one of the top schools for Marine Biology and Marine Science in the United States. My plan (always subject to change) right now is to stay in Guam at least until next year and continue to work on core requirements for a BS degree. In the fall I’ll be taking Algebra and Trigonometry, Principles of Biology II, General Genetics, and General Chemistry. If I get into TAMU-G I should be able to finish my BS in Marine Biology with a minor in Diving Technology and Methods by 2023. That still gives me plenty of time to do a third career 🙂
Once I’ve completed my degree I will likely go on to complete a Masters, and expect to be involved in research and teaching. I could easily see myself returning to Guam but we’ll see. I expect education to open up more opportunities for me to pursue my passion and that there will be many more underwater adventures in the years to come 🙂
That’s it for the update 🙂 I’m working on another post now for my “Choosing Equipment” series. That post will be about choosing a BCD. I’ll also be working on a post or two about the diving here in Guam, so stay tuned 🙂
I know it’s been a few months since I posted…. I’m going to finish up here and then in my next post I’ll write about what I’ve been doing 🙂
As I’ve mentioned in my earlier blog posts on choosing equipment, I’m writing these pieces mainly for those who are new to diving. They reflect my opinion and experience. I always suggest that you seek advice from your instructor as they may have a different and maybe a better way than I do 🙂
Fins are basically divided up into two types… full foot, that you put on like a slip-on shoe, and open heel fins with straps. There are several variations of these two types. There are bladed fins with different materials to channel the water when kicking. Those may be stiff or flexible, or somewhere in between. There are versions of the standard blade fin that are split, and another version which has vents to channel water. There are shorter fins designed for snorkeling and very long fins used in free-diving.
Full-foot fins tend to be lighter in weight. Many are designed for snorkeling so make sure the ones you choose are heavy enough to do the job. Short and very lightweight fins that are adequate for snorkeling will not provide enough thrust for scuba diving. Some divers prefer full-foot fins when diving from a boat or a sandy beach in tropical water. These fins are worn with bare feet or thin socks. In areas where the water is colder they would not be suitable as booties would be required for warmth. Booties are also a requirement for many beach entries especially across rocks or coral. I have a few friends who use free diving fins (a whole different animal from standard snorkeling fins) when boat diving and swear by them. Freediving fins have a larger surface area which gives them more thrust. This larger surface area is the result of being much longer giving them a “snap” as the diver kicks which generates even more power.
A good quality full-foot fin will have a solid, rigid sole which is more efficient in transferring energy from the foot to the blade of the fin. A full-foot fin should have enough space to insert your pinky in between your heel and the back of the foot pocket. If you can’t get your pinky in, then the fins are likely too tight. To much space and the fin will be too loose. These type fins will definitely be more slippery in the water and feel looser, so keep that in mind. Make sure there are no spots digging into your foot. Sit on a stool or chair and flex your feet. If your toes are sticking out make sure they’re not squeezed or that the top edge is rubbing. If your feet are prone to cramping or blistering, this may not be the best choice.
Most scuba divers use open heel fins with straps that are designed to be worn with booties or boots. These fins are available in a variety of materials and versions. Materials include, monoprene, polyprophlene, thermoplastic, and of course rubber. Some fins will combine these materials. The main variation in design will be blade fins (with a variety of stiffness), split fins, and vented fins. Most new divers (and many experienced ones) stick with the standard blade fin.
Fins can have differences in flexibility. Stiff fins are generally considered superior for frog kicking and maneuverability. They work well for backing up or for maneuvers like the helicopter turn. For a standard flutter kick though, the added resistance can bring on fatigue much quicker for those who are not conditioned for it. A more flexible fin is easier to kick with and is less tiring.
Split fins have a section removed from the center, thus “splitting the fin”. The theory behind split fins is that on the down stroke (the power stroke) the fin creates a “vortex” adding to forward propulsion. On the upstroke, which doesn’t provide as much power anyway, resistance is lowered by allowing water to flow through the split. It’s a popular design for divers who have ankle or knee problems or who cramp easily. Easier kicking can also translate into better air consumption.
The primary con with split fins and very flexible fins, is that they do not provide as much propulsion as the stiffer blade fins. They lack the power in dealing with current that a stiffer fin provides. They are not as effective in frog kicking, backing up, or performing maneuvers like helicopter turns. The stiffer fin is superior for these maneuvers.
A popular fin for tech divers, cave divers, wreck divers, and underwater photographers is a version of the bladed fin sometimes called turtle fins. These fins tend to be a bit shorter and wider than a standard bladed fin. They are stiff and have vents that allow water to pass through reducing drag and increasing efficiency. They require strong legs, especially for the flutter kick. They will move you through the water quickly and efficiently. These fins are much more effective at fighting current than lesser versions. They are superior for maneuverability as well. Versions include the Aqualung Rocket Fin, Apeks RK3, ScubaPro Jet Fin, and OMS Slipstreams.
Open heel fins should have easy to use heel straps. No one wants to struggle getting fins on and off. This can be an issue making certain entries, especially through surf when you are timing the waves during your entry and when you’ve waded out far enough need to put your fins on quickly. When getting out of the water after a boat dive you want to be able to easily and quickly remove your fins if you are climbing a ladder. Getting your fins off quickly so you can climb out is especially important when conditions are rough.
One choice for the strap is the traditional stainless steel buckle. The flat, rubber strap is adjusted for comfort and to keep the fin on your foot. They are less expensive, but can sometimes be a struggle to get on and off in the water as there is not a lot of “stretch” in the rubber strap. Another possible choice are straps with releasable buckles. I’m familiar with two versions. One allows the buckle to fold back, loosening the strap. The other unbuckles the strap completely. Only do this on one side getting out of the water. You don’t want to lose your strap! The last choice I will discuss is a flexible strap that is made from material that will snug your fin around your heel, but can easily stretch to allow easy removal. These straps are made from either stainless steel spring, or rubber bungee cord. I personally use spring straps and prefer them for their toughness and ease of use. Aftermarket spring straps are available for many major brands. I purchased spring straps for my Mares Superchannel Fins while my OMS Slipstreams came with spring straps already installed.
Booties or drysuit boots are pretty much a necessity for most shore diving or when diving in colder waters. Booties are typically made of neoprene with with hard rubber soles. Felt bottoms which can offer additional traction when crossing slippery rocks are also available. The best booties for you will depend on conditions. Temperature, shore or boat entries and if shore entries the type of shore. Sand or slippery rocks. Thickness will depend on water temperature and will typically be similar to your wetsuit. Tropical diving is usually 3 mm. For diving in tropical waters from a boat, low top booties will work fine. Many people prefer low tops for warm water diving in general. My personal preference that will meet most conditions here in Guam (and other tropical destinations) is felt bottoms with high tops. Shore entries here are often across slippery rocks or walking across the top of a reef. I like the extra grip of felt bottoms. I like the high tops for the extra protection for my ankles in case I step in a hole. Another thing to look for is good protection on the sides, heel, and top of the foot. A sole that will give protection adequate for the conditions you’re diving in (ie… rocky entry). A rubberized covering of the neoprene around the heel gives protection for the heel strap, and over the toes and the top of the foot will give extra protection for the foot when walking during a shore entry and the top of the foot when it’s inside the foot pocket of the fin. You get what you pay for. Without the extra protection I’ve seen holes worn into booties in less than a year from just normal wear. It generally pays to get quality in the long run.
I hope I’ve provided some things to think about when choosing equipment. I’m sure that I’ve missed a few things 🙂 Again, as I mentioned in the beginning, I always suggest consulting with your instructor or your local dive shop as well. They very well may have other things to consider that I may have missed. Experienced divers can have strong opinions about equipment and it’s always good to hear their reasoning. Being open to new knowledge is a good thing!
This is the second installment of my series on choosing equipment. I’m writing this series more for the beginning diver. As always I recommend that checking with your instructor is a good idea (they may not agree with all my ideas 😉 ). You’ll find that the retail staff at your local dive shop can also be a great help when purchasing dive gear. Having some information to start with though can help provide a basis for discussion. The first installment, if you missed it, was on “Choosing a Mask”. This time I’m going to write about snorkels.
When I was 12 I purchased my first set of really good quality snorkeling equipment from Copeland’s in Corpus Christi, Texas. (in case y’all were wondering that would have been in 1970 😉 ). Copeland’s was the first dive shop I ever went in. My father was working in Corpus Christi and I was visiting him for the summer. When I saw the dive shop I begged him to stop. (I’d already became enamored of diving from watching Sea Hunt re-runs and The Undersea World of Jacques Cousteau on TV). I walked out with a set of ScubaPro snorkeling equipment 🙂 The snorkel, of course, was the simple J type. With a little practice, it did the job quite well and it would actually be a few decades before I used any other type!
A snorkel is a required piece of equipment in the open water course. Below I’ll write about the two primary types of snorkels I believe are appropriate for scuba diving, and what I personally use. First I will discuss some of the reasons that having a snorkel is a good idea.
Here on Guam we are very fortunate to have many quality dive sites that can be dived from shore. It’s easier to find your descent point (the place you want to begin your dive) with your face in the water. That means breathing from a snorkel or your regulator. Although air consumption at the surface is minimal, that doesn’t mean that a diver doesn’t want to save all of their air for the actual dive!
Anyone who dives from a boat will likely find themselves at some point, coming up a distance away from the boat… not always by choice 🙂 If seas are choppy or rough then keeping your mask on your face to avoid water in your eyes and something in your mouth to breathe with is a good idea! A snorkel in these conditions comes in handy while waiting for the boat to pick you up.
Lastly, you may end up surfacing away from the boat or your exit point and have a long surface swim back.
In my opinion (some might not agree) for scuba diving the choices are really between the traditional “J” type snorkels or the “Semi-dry” snorkels. A dry snorkel is great for snorkeling, but not so much for scuba diving (or even freediving) in my opinion. They generally work quite well at keeping water out. But, since it doesn’t allow water in, the snorkel is filled with air and therefore is buoyant underwater. This may pull the mask away from your face breaking the seal. They normally use some type of valve to keep water out and this is another failure point (If you purchase one of these types spend the money for quality). The mechanism at the top of the snorkel that keeps water out also makes the snorkel a bit more top heavy. Some people swear by them for snorkeling and if by “snorkeling” you mean floating on the surface and observing what’s below, I can understand that. Again, just my opinion, but I don’t like them for scuba diving.
For those reasons, I consider either the traditional J style or a semi-dry type to be the best choice. For both of these snorkels, you want to look for a comfortable mouthpiece made from silicone. Tubes can be from half an inch to an inch in diameter. The largest diameter is easier to breathe from but can be harder to clear. I personally own one of each type.
The traditional “J” snorkel, is basically just a tube in the shape of a J. These are the simplest design and what we all used when I first started snorkeling in the early 70’s. There have been a few improvements, mainly in areas like materials and comfort of the mouthpiece, but the basic idea remains unchanged. This is still the type preferred by many free divers and spearfishermen. They are very simple but require a certain amount of skill and practice to use. Swallowing seawater is no fun! Water can splash into the top and the water has to be blown out using your own lung power. There are two methods which are both taught in your Open Water course. There are both rigid and flexible types.
One innovation of this old design is materials. I have an Aqualung Nautilus Travel Snorkel made from soft silicone which rolls up, has it’s own case, and easily fits in a pocket. No purge valve or splash guard. This is the snorkel that’s normally attached to my mask these days when I’m teaching and shore diving in Guam. I saw this one in the shop after I came to Guam. I liked the compactness of it when it was rolled up so much that I bought it!
The “Semi-dry” snorkel has a splash guard at the top which helps keep water out at the surface in the event of a wave or splash. This normally is accomplished in the form of slits or vents to divert water that splashes over the top. They don’t keep water out when fully submerged though so you will still have to clear it at the surface before using it. A purge valve at the bottom for water to drain out makes this easier. There is an area for the water to collect below the mouthpiece and a one-way valve there. Although this makes them much easier to purge, some would argue it’s a potential failure point. This is less of an issue for a snorkel than a mask in my opinion just due to the way a snorkel is utilized. I will say that I’ve had mine for years and it still works fine. The area between the mouthpiece and the tube that sticks out above your head is corrugated and flexible so that the mouthpiece will hang out of the way when the snorkel is not in use.
I’ve owned an Oceanic Pocket Snorkel for years. This one folds up and has a band to secure it. It’s not as compact at the Nautilus, but it still fits easily in a BCD or thigh pocket.
I really like both these snorkels. The semi-dry is definitely easier to purge and this is likely a factor to consider for a new scuba diver. The J type is normally less expensive if you purchase a traditional one. One like mine made from soft silicone so it can roll up is a bit more expensive.
I consider a snorkel to be an important piece of safety equipment. In a real emergency, in choppy seas, and with an empty tank and no boat in sight a snorkel could make all the difference. Although it’s never happened to me, it has happened to other people, so I think of it like insurance. Even when I take mine off my mask (for example when I’m diving in an overhead environment like a wreck penetration), I have a snorkel in one of my pockets if there is even a remote possibility of need.
If you have ever been swimming in the ocean and felt a burning pain somewhere on your exposed skin, there is a good chance that you were just stung by a jellyfish! Some species are quite small and your first inkling that they are there is when you are stung! In Guam (and other parts of the world as well) jellyfish can be a threat to swimmers, scuba divers, and other water sports enthusiasts. Encounters with most jellyfish fall somewhere between mild discomfort to excruciating pain. In a handful of species even death may occur.
“Jellyfish” is the common name associated with the medusa phase of the sub-phylum Medusozoa which make up the majority of the species within the phylum of Cnidaria. There are four classes which include Scyphozoa, Cubozoa, Hydrozoa, and Staurozoa. Most jellyfish are free swimming marine animals with a shape like a bell or upside down bowl with trailing tentacles. The tentacles are armed with stingers called nematocysts that they use to capture prey and/or as a defensive mechanism. It’s thought that interaction with chemicals on the skin is what causes the nematocysts to fire and inject venom.
Another member of the phylum Cnidaria, the Physalia utriculus, also known as the Indo-Pacific Man-of-War, is also spotted in Guam waters (and of course, throughout the Indo-Pacific region). It has a smaller float than the Portugese Man-of-War and only a single tentacle. The Physalia utriculus is not a true jellyfish, but a siphonophore. It is made up of medusoid and polypoid zooids. These are tiny animals that are connected to each other and perform the same functions as organs or tissues do in multicelluar organisms. A gas sac keeps it afloat and it is at the mercy of wind, waves, and current. They look like a small blue bubble floating in the water. Just remember that long tentacle hanging beneath it will sting you!
In Guam, box jellyfish seem to gather approximately 9 days after a full moon. This likely has an association with the reproductive cycle. Although not of the deadly variety, they still can pack a painful sting. These jellyfish are normally 3-6 inches long, with a four-sided, transparent bell. They have four tentacles, one on each corner of the bell.
Washed up man-of-war and box jellyfish under moist conditions can still sting for weeks, so keep an eye out when walking on the beach. As a scuba diver, my primary protection is to minimize exposed skin by wearing a dive skin and hood if I am expecting them in the water. Most divers wear a rash guard as a minimum.
For first aid, use something to scrape any parts of the tentacle that have stuck to the skin off or use tweezers if you have them. Do this carefully as they can still sting! The usual advice is to rinse liberally with saltwater. Vinegar if you have it may help. Soaking in very hot water (no more than a 113F) can help break down the toxin. Soak for at least 30-45 minutes. An analgesic like aspirin can help with pain and a hydro-cortisone cream or oral antihistamines can help with itching and swelling.
If there is a sign of a severe reaction such as intense pain, difficulty breathing, swallowing, chest pain, nausea, vomiting, numbness then go to the emergency room immediately. Getting stung in the face, around the eyes (more applicable to swimmers than divers), or in the mouth, especially if any of the tentacles get in the mouth causing swelling of the lips and tongue, then see a doctor immediately.
For most jellyfish stings first aid and following up by treating the welts with ice packs (for swelling) and antibiotic cream for infection while they heal should be enough.
Currently in Guam box jellyfish are expected July 8th-11th according to Brent Tibbatts, a fisheries biologist with the Guam Department of Agriculture. Box jellyfish are expected in shallow waters around Merizo, Piti, Tumon, Pago and Talofofo. Expect the Indo-Pacific Man-of-War to be seen on the north and east coast of Guam where prevailing winds and current pushes it onshore. Sightings should be reported to the Department of Agriculture by calling 735-0289 or by email at firstname.lastname@example.org.
This post is aimed primarily at new divers and will be the first in a series on choosing equipment. It’s always a good idea to discuss equipment choices with your instructor. The retail staff at your local dive shop can be a big help as well. Hopefully this post will provide some things to talk about with them 🙂 I’m going to share some thoughts I have about choosing a mask for diving. What to look for. What kind of choices are out there. Things to think about. Things to be aware of.
When it comes to dive gear in general, what’s most important is fit, comfort, and quality. It pays to buy quality and money spent on that will pay off in the long run. Dive equipment, in general, is built to last and as long as it’s properly cared for and serviced on a regular basis, it will give you years of service.
The first items that someone who is new to scuba diving will purchase are a mask, snorkel, fins and booties. Today we’re going to discuss masks.
Masks have come a long way from the high volume, black rubber, oval-shaped, mask that I started with back in the 70’s, but they all basically still do the same thing… They cover your eyes and nose, providing an air space so that we can see clearly underwater and equalize our ears. A mask is one of your most important purchases as a mask that is uncomfortable or a poor fit can ruin your dive.
Today’s masks come in different designs. You can get single or double lenses, side lenses, black or clear silicone. It should go without saying, but don’t buy a mask made from cheap rubber or PVC with plastic lenses. These are not suitable for scuba diving. 100% Silicone is the material of choice and lenses should be tempered glass. Choose a mask with a wide skirt (the part of the mask that seals against your face). This will create a better seal. Frames are available in a variety of colors.
Volume refers to the size of the airspace within a mask. Some will prefer the increased feeling of openness and greater peripheral vision of a high volume mask. Be aware though that these masks will require more effort to clear, especially when fully flooded. A low volume mask is easier to clear and seal to your face. I recommend staying away from purge valves. Some like them, especially for snorkeling, but I see it as a potential failure point.
Silicone is available in colored (opaque) or clear. Many divers prefer clear silicone (Some people might feel a little claustrophobic I’m told, although I’ve never experienced this myself). Someone who wants more peripheral vision can also opt for a mask with side windows. These are available in both single lens and double lens masks.
Photographers often prefer black silicone based on the theory that blocking light from the sides cuts down on glare and makes it easier to see through the viewfinder of a camera. Clear silicone can discolor over time, especially if stored with rubber. That doesn’t affect using the mask though, just the cosmetics. Both work well so it really boils down to personal preference.
Single lens masks are probably the most common and many people like them. One potential issue is that they generally have a smaller nose pocket, so fit can be an issue. If you feel any pressure at all on your nose when trying on the mask, then a double lens mask could be the solution. Double lens masks have room for a larger nose pocket. You really don’t notice the divider in the middle. No more than the divider in a pair of sunglasses. Your eyes will focus beyond that.
Then we have frameless masks. A single lens is joined directly to the silicone skirt. They are very low volume, lightweight, and flexible. This can be an excellent choice if you can find one that is a good fit.
Let me also mention a bit about coated lenses. Anti-reflective coatings are great for experienced divers. They reduce reflected light and increase transmission… what’s not to like? The problem (especially applicable to students, new divers, and instructors) is that a mirror effect resulting from the coating makes it difficult to see the eyes of the diver wearing the mask. Not being able to see the instructors eyes can be intimidating to students. Not being able to see a students eyes can be problematic for the instructor by making it more difficult to evaluate the students condition.
Now that we’ve discussed different kinds of masks, lets talk about fitting them. When looking at masks, most important is fit and comfort (also true of other gear we will talk about in future blog posts). Choose one that will fit your face and will provide a good seal without the strap. Push the mask against your face creating a vacuum. Make sure that you don’t have any of your hair breaking the seal. If the mask stays in place and no leaks are detected, then it should be a good fit. Without a good fit, the mask will leak!
While trying on the mask, once you’ve determined you have a good seal, then make sure that the mask skirt isn’t digging into your nose and feels comfortable around your upper lip and temples. Also be aware if there are any spots where you feel pressure on your nose or forehead, especially between the eyes. Make sure there is room.
Check that you are able to pinch your nose in order to equalize. If the nose pocket is too big you might have trouble. Now put the mask on fully with the strap. You should get a good fit with minimal strap pressure. Make sure the strap is sitting on crown at the back of your head and not on your ears.
The strap is there to keep the mask from being dislodged. Water pressure should be more than enough to seal the mask against your face if it’s a good fit. Tightening the strap to fix a leaking mask normally backfires and just makes the leak worse as a too-tight strap can distort the skirt!
Your mask will come with a silicone strap. You can replace this strap with a neoprene slap strap or cover that will fit over the silicone strap. You’ll find this to be more comfortable and it will virtually eliminate pulled hair.
Caring for your mask is important. Here are a few tips.
Once you’ve purchased your mask before using it the first time you will need to clean it. Agents used during the manufacturing process end up create a thin film on the lens of the mask. This causes it to fog quite easily. A paste toothpaste or liquid scrub can work. There are also products like Sea Buff, that are sold at most dive shops that will do the trick. Be sure to treat both the inside and outside of the mask lens. It may take more than one application. An old tip was to burn the film off. This is not recommended by manufactures. Applying a lighter to the glass of a new mask to remove the film has been linked to weakening the lens, causing it to shatter. Using a lighter will void any warranty on the mask. Follow manufactures recommendations when it comes to cleaning.
Hold on to the mask box that your mask comes in. Rinse your mask in fresh water after use. Remember that bugs love silicone so once it’s dry put it away in its box! Keep it out of direct sunlight as much as possible. When it comes to defog a product like Sea Gold goes a long way. Some people use a solution of baby shampoo and a lot of the “old-timers” still just use spit 😉
I hope these tips will help you find the perfect mask! Everyone has a unique face, so take your time and try on several masks. It will be time well spent.
On my blog I’ve written about my travels and the places I dive more than anything else. Occasionally I write about other subjects as well. Today I’d like to shed a little light on a problem that has been around for years, and yet it appears that there are many people who are still unaware of it. At the end here I will share my own personal experience.
Braided hoses are popular for a variety of reasons. They’re very flexible and resistant to cuts due to their layered construction. When I saw them for the first time 10 years ago, I remember thinking, “What a great idea”!
2009 was the year I switched to a backplate and wing and started diving with a long hose. I bought new regulators that year and opted for Miflex hoses. When I bought them originally I was planning a trip which involved a lot of wreck diving (Coron, Philippines). Jagged metal, especially in ships that were sunk in battle, is always a potential hazard. Braided hoses seemed the most sensible choice at the time. That layered construction in addition to the protection it gives can, as it turns out, also hide potential hazards.
The issue I’m writing about was first brought to my attention by a blog article written by my friend Andy Davis. He’d written about a problem with braided hoses which resulted in an emergency air-sharing ascent. Nylon Braided Regulator Hose Diving Emergency
His investigation indicated the problem was likely “polymorphic crystallization”. After reading it I very understandably became concerned! Was this an isolated incident, or a real cause for alarm? The red flag was up though and I started doing more research on the issue. I discovered that what had happened was not an isolated incident. DAN (Divers Alert Network) had become aware of the problem and began investigating it also (referring to Andy’s blog post in their article). They found that at least one hose manufacturer and a shop that serviced equipment in a busy diving area had also reported the problem. How was it that I’d not heard about this? Not just me but others as well! DAN’s investigation came to the same conclusion that Andy had several months earlier, that the issue was polymorphic crystallization. Alert Diver-Invisible Crystals
Polymorphic crystallization is a chemical process. It results from a heating/cooling cycle. According to DAN, all of the reports of problems came from tropical areas.
The current theory is that repeated cyclical heating and cooling of the hose lining promotes this form of crystallization in materials either unsuitable for this application or affected by certain chemicals or bacteria. The sun heats the hose, then the flow of breathing gas cools down the internal surface of the hose again. This process recurs with each dive, and the crystals grow and accumulate over time. Enough crystals eventually form to encroach on the gas flow, or they migrate toward the second-stage regulator, resulting in significant failure of the breathing device.-Alert Diver “Invisible Crystals” Q1 Winter 2017
Now for my personal experience… I had not noticed any external issues with the hoses. No cuts, no bulges, no chafe marks. Everything seemed normal. They both seemed to breath okay. Although, having regs that are both high-performance regs (Dive Rite Hurricanes) and that could be adjusted to make breathing easier probably helped hide that there was a problem. I wouldn’t have noticed an increase in work of breathing. I would have just adjusted them to make them easier to breathe from. In hindsight the hoses were 10 years old, but hoses aren’t serviced, they’re generally replaced when they show signs of wear. Mine didn’t have any apparent problems other than they seemed (beforehand) to have held up exceptionally well for their age.
I’ve been pretty busy with my move and getting settled. I stopped in at Guam-Micronesian Islands Scuba Wholesale early last week to say hi to my friend Jim Pinson. Jim is the local Dive Rite dealer. I mentioned I was going to replace my hoses because I’d heard there could be problems. He’d also heard this and suggested we cut the hoses open to see what we would find. I’d had the same thought and agreed. After replacing the hoses we cut them open to see what we would discover.
The hoses I replaced were a 24″ hose and an 84″ hose (I have a typical backplate and wing setup with a long hose as my primary and secondary worn on a necklace). Both hoses have manufactures marks and the year they were manufactured (2008). I purchased them just under 10 years ago in 2009. Although I own more than one regulator set, these were used quite often and had probably at least 400 dives on them.
The first hose we inspected was the 24 inch. When we cut it open, no issues were found. The hose was in perfect condition! I thought to myself, “Well, better safe than sorry”.
The second hose we inspected was the 84 inch. This one was a completely different story! The end had obvious polymorphic crystallization that could be seen. There was still a space in the middle for air to flow through the hose, but the crystallization process had resulted in a much smaller diameter! This is where having high-performance regs enter the picture. A lower performance regulator would likely have given me some indication. When we split the hose open there was a “significant” amount of material inside the hose. It was fortunate that this material did not enter and clog my 2nd stage during a dive!
I contacted DAN and made a report. Jim also contacted his braided hose distributor and they asked to see the hoses. He asked my permission to send them and of course I said yes. I’m sure they will be making inquiries to the manufacturer. I’m curious what insights they will come up with. I will definitely keep everyone posted. I suspect that they will dismiss this as a problem because of the age of the hoses.
My understanding now is that the newer braided hoses do not have this issue. They’ve changed the material of the lining to something that is resistant to this chemical process in 2014. There are likely still hoses in use out there though that look great and have no visible issues, yet hiding inside is an accident waiting to happen! 4 years is not that long and these hoses, externally at least, hold up extremely well. I hope you’ll share this post and help get the word out there for the benefit of those who may still be using older hoses.
Over the years I’ve never had anyone say to me, “have you heard there are problems with braided hoses?”. I was unaware of it until I stumbled across the post on Andy’s blog. I’m on the internet quite a bit when I have the opportunity and am always reading on subjects related to diving and yet only just recently did I hear about it! All the more reason I think to continue spreading the word. Having said this I’m sure there are people reading this who have known about it for years and might ask why didn’t I know? The answer is simple… because no one told me!
I’m sure there is some debate about how often a hose should be replaced… At the time that braided hoses were released they were touted to be lighter, stronger, and much more durable than traditional rubber hoses. I’ve seen around the web that 5 years or 500 dives, whichever comes first is a good rule of thumb. It’s a suggestion though, not a rule. Maybe a good one? I’ve also seen opinions that as long as they are cared for they will last much longer. Hoses wear out but how long does it take? On an online forum I looked at when I was researching this article, someone claimed to have been using their hoses for 20 years… maybe an exaggeration?
When my regs were serviced in 2014 (after being in storage for 4 years) and again in 2016, the technician didn’t suggest I replace the hoses, even though the manufacture date of 2008 is clearly visible. The hoses still appeared to be in good shape (externally they still appeared to be in good shape when we cut them open to). Neither time did anyone at the shops where I had the service done mention any problems with polymorphic crystallization. This is just another indication to me that there are still a lot of people who might be unaware of this issue. I think a lot of people don’t pay to much attention to hoses. They replace them when they notice a problem. All the more reason to let people know that there might be a hidden problem that is not readily apparent!
My hoses had probably over 400 total dives. The shorter hose was pristine when we examined it. No problems. Why was one hose fine, but the other one not? Was it because other than to check that reg for function before each dive, it really wasn’t being used?
When I changed my hoses I went with rubber ones this time. I think I’ll give it a bit of time to see how the new materials hold up.
In the future I’ll be planning to change my hoses on a more of a schedule and not simply based on inspection. Getting complacent can be an easy thing to do for anyone even someone who has dived for a long time. I’m sure I’ll get a bit of criticism for not having already made that a practice and changing my hoses sooner, but I will bet that there are others out there who may have gotten a bit complacent too. They are still using these hoses and better a bit of embarrassment for me than an accident… Better safe than sorry, right?
Thank you to Andy Davis for his efforts to bring attention to this problem and also for his permission to link his original blog article. If you’re looking for world-class technical diving instruction Andy is your guy! Be sure to check out his blog! Scuba Tech Philippines
I first thought about living in Guam after I made a dive trip here in December 2007. I was stationed in Japan at the time and I really enjoyed the trip and the diving. When it was time to transfer I tried to get orders to Guam. Unfortunately, I was one month shy of being able to do a full tour and had to return to the United States for my last tour before retirement. I was stationed in San Diego. I did get to dive in California and Mexico as a result of that so it wasn’t all bad 🙂
Those of you who follow my blog already know my story. How I decided a few years ago to sell everything and just travel full-time. You’ve also read about my visit to Guam and my trip to Chuuk last year. How I decided to become an instructor 40 years after making my first scuba dive and to move to Guam to teach.
On the night of March 25th I flew out of Manila on a United flight bound for Guam. Both United and Philippines Airlines have regular flights between Manila and Guam. I arrived in Guam around 4:30 AM on Monday, March 26th. After passing through Immigration and Customs, I picked up my rental car from Alamo. I ended up at Denny’s where I had some breakfast, used their wifi, and drank coffee for a couple of hours. I decided around 7 AM to go for a drive. I still had a couple of hours to kill until I met my real estate agent at 9 AM.
I decided to see if I could drive around the island since I still had some time. The road traveled along much of the coastline and I was struck by the differences in water conditions. The Marianas Islands, including Guam, Saipan, and Tinian, lie upon the eastern border of the Philippines Sea. I noticed that the seas were relatively calm on the western side of Guam. On the eastern, Pacific Ocean side the waters were quite rough. It also explains why most dive sites are on the western side of the island!
Miyuki Atsuta from Ellen’s Realty was my agent. Decent low-cost apartments that were currently available it turned out were in short supply. By Thursday I’d seen everything on the MLS that was relatively close to the area I wanted to live and was within the budget I’d initially chosen. The problem was availability! Everything that was currently available also had people on a waiting list. I had a chance at getting one of these apartments, but no one seemed in a hurry. One complex said there were six people in front of me and they were going down the list and waiting for people to get back to them. Another complex that my agent had submitted an application to before my arrival, we were also still waiting for a decision. He seemed in no hurry and given the demand I could understand why!
I was debating getting on a waiting list and then flying back to the Philippines until an apartment was available. After some thought I decided that I was going to have to increase my budget. New apartments appeared on the MLS on Thursday. I picked 4 of them to see on Friday and emailed Miyuki.
After looking at all four apartments I chose one in Asan based on it’s proximity to the dive shop. It’s literally 2 minutes from Micronesia Divers Association in Piti where I will be teaching. It’s less than a 15 minute drive to the Navy Base which is important to me as a retired Navy sailor. Having easy access to the base for shopping, buying fuel, and using base facilities like the gym and swimming pools was important to me. I’m also near the Navy Hospital where I will be getting medical care. My new apartment is a 500 square foot studio with an ocean view, a swimming pool and a great location! Miyuki did a great job and if you are looking for a place in Guam definitely give her a call!
On Saturday, I rented a PO Box, paid my deposit for electric and scheduled it to be turned on Monday, then went by the apartment to finish paperwork and pick up my keys. On Monday, April 2nd, one week after I arrived, I moved into my new apartment.
My 2nd week in Guam was busy. In between looking at apartments, I had been looking at vehicles. Once I paid my deposits and knew I was staying, I’d found a vehicle at AutoSpot over the previous weekend. My salesperson was Jeri Miyasaki and she took very good care of me. I got a great deal on a 2006 Nissan XTerra. I picked it up on Monday. Alamo Rental Car gave me a ride back to the auto dealership after I turned in my vehicle and didn’t even charge me!
I’d bought a bed at the Navy Exchange on base over the weekend and I picked it up on Tuesday. I got that home and set up. Monday night I’d slept in a beach chair… the bed was much more comfortable! On Wednesday my high-speed internet, cable, and home phone were hooked up. I’d gotten my cell phone service on Saturday. I bundled all of this with GTA.
On Thursday, I went to the Social Security Office and ordered a new social security card. I’d been told that an original social security card was required to get a drivers license. I then went to get my business license. I dropped off a copy of my business license, tax form, and my contract at Micronesia Divers Association.
I picked now to get sick with a pretty bad chest cold. Obviously I wasn’t going to dive! I spent the weekend and the beginning of my third week in Guam mostly staying home trying to recuperate. Later in the week I was feeling a bit better and stopped by MDA and bought two new tanks. I’ll be writing about choosing a scuba tank in an upcoming blog piece. I also had the chance to talk a bit with Eric McClure, one of the Course Directors, and with Lee Webber, who owns MDA with his wife June.
I’m finishing up my 4th week here now. I was at the instructors meeting at MDA last Sunday. I got a chance to get a look at the logistics a bit. Where the classrooms are, the pool and how to schedule that for training, where to take students for open water shore dives, how to schedule boat dives, and a look at how everything works. MDA runs a number of promotions to help bring in students and they give a lot of support to their instructors. One of the reasons I chose them.
I worked on Friday, taking a diver from California who was in Guam on business, diving. The first client of my new business! That was a really enjoyable day! I took him to San Luis Beach and Gab Gab Beach and we had two nice dives.
Weekends at MDA have free beach dives. Anyone can show up and go for a dive. Parker Van Hecke and Kim Harris, long-time instructors at MDA lead the group. The Saturday morning dive this week turned out to be at Dadi Beach on the US Naval Base and was a nice dive. I tagged along and had an enjoyable morning! If you want to get an introduction to Guam dive sites that you can do from shore, this is the way to go. Dives are at 9 AM and 2 PM on Saturdays, and 2 PM on Sunday. Always a good idea to check with the shop ahead of time.
Currently, I have an Advanced Open Water class scheduled for May 2nd and an Open Water class for May 7th. If you’re in Guam and interested you can sign up through MDA or contact me directly and I’ll take care of you. I’m also available for guiding and can set up private or semi-private lessons for you as well.
2018 has been a pretty good year so far. I started with dives on New Years Day in Hawaii. I traveled to the Philippines the end of January and stayed until late March. Now I’m in Guam and looking forward to experiencing some great diving here along with introducing new people to the lifestyle I love. It’s going to be an awesome year!
I flew out of Honolulu on Tuesday afternoon, January 30th (yes I’m way behind :)). I had spent most of January working on my MSDT (Master Scuba Diver Trainer) program, which certified me to teach an additional 10 specialties. I finished that up on Sunday, January 28th. Monday and Tuesday I ran around taking care of last minute errands. I mailed most of my books and instructional manuals to my friend Jason Cunningham in Guam along with some of my dive gear. I still had plenty of dive gear in the Philippines. I dropped my vehicle off at the same dealer that I purchase it from. I’d arranged for them to sell the vehicle on consignment (much cheaper to buy a vehicle to use for 3 months then sell it, than rent). I got a cab to the airport from the dealership. It was a much shorter flight to Manila than when I fly from Houston! I arrived in the evening on January 31st (after crossing the International Date Line).
On February 4th I met my friends Ron and Dennis from California at the airport. Since we were able to split the cost 3 ways we opted for a van to take us from the airport to Batangas Port (P3300/$65). There we caught the ferry to Puerto Galera.
I’d made the arrangements over a month previously. Dennis had just over 2 weeks. Ron would be in the Philippines for 5 weeks. I would stay until March 25th and then fly to Guam. We planned a week in Puerto Galera and a week in Malapascua. In Puerto Galera we would dive with Frontier and in Malapascua with Evolution.
After arriving in Sabang, we dropped off dive gear at Frontier and then headed to AAA Hotel. I’d had a few days to recover from jet lag. Ron and Dennis had not. Diving could wait until the next day.
I’ve written pretty extensively about Puerto Galera in the past so I will not rehash that now. We had a great week in Puerto Galera! Those of you who have followed my blog for a while know that I’ve spent a fair amount of time diving Puerto Galera. I’ve made over 80 dives there. We dived a relaxed pace that week completing 13 dives in 6 dive days including multiple dives at a few sites. Dive sites included Sinadigan Wall, Sabang Point, Hole-in-the-Wall and Canyons, Kilima Steps, Alma Jane, Sabang Wrecks, Boulders, West Escarceo, and of course a trip over to Verde Island.
I will mention one particular dive though. We were diving Canyons and got separated. Canyons is often a roller coaster of a dive due to strong currents and that day was no exception! On top of that visibility was probably not more than 30-40 feet as we’d gotten a fair amount of rain that week. I stopped to take a photo and when I looked up the rest of the group was gone! I went with the current expecting to catch up with them. At one point I spied bubbles but it turned out to be another group.
Under normal circumstances when separated you would search for a minute and then surface. With the current ripping it wasn’t normal circumstances! I moved towards our normal exit point as I felt it was my best chance of locating the group. I reasoned that searching would be difficult due to the conditions and it would be best to surface in the area where the boat would expect us. Our guide knew that I was familiar with the site and I did not think he would leave the other 3 divers to look for me given the conditions. The most logical course was to head to the ascent point.
There is an old anchor embedded in the coral where we normally end the dive at. Once I made it there, I waited for a minute and when no one showed up I decided that possibly they had already surfaced and started my ascent. The safety stop is in the blue and the current was still running strong. When I surfaced there was no one to be seen around me. Then I saw a DSMB pop-up. Unfortunately for me, it was up current from where I was! I started kicking towards it. It was only a couple hundred yards but…. did I mention it was against the current? 😀 A few minutes later heads started popping up and it was the rest of the group. I’d made it to the exit point ahead of them. I was aching from fighting the surface swim back (sometimes my body reminds me that I’m almost 60!).
Ron and Dennis flew to Cebu on the 13th. I ended up skipping Malapascua. I was sick and wasn’t going to be able to dive. As it turned out, there were issues with the weather and they were stuck in Maya for 2 days because the ferries weren’t going over to Malapascua Island. I improved a bit then felt I was relapsing. I went to Manila for a few days then went to Medical City Clark to get checked out. I was diagnosed with a bacteriological infection and apparently, my arthritis was acting up in a big way! Antibiotics and a strong pain reliever and I was feeling much better the following week.
Ron and Dennis were finishing up Malapascua at the same time I was getting checked out at Medical City Clark. Dennis headed back to the US and Ron went over to do some diving in Subic Bay.
I caught up with Ron there although I didn’t dive. He told me he’d had a great time diving with Evolution in Malapascua. I wasn’t surprised as I’ve been diving with them for years. We visited the Bureau of Immigration office in Olongapo and extended our visas. After some discussion, we headed back to Puerto Galera.
We arrived back in Puerto Galera on February 28th. It’s high season and the only rooms that were available in our price range was the opposite end of Sabang from Frontier at Reynaldo’s. We really enjoyed Reynaldo’s which had a great view, good service and a good breakfast for a very reasonable cost. We would usually sit on the balcony in the morning and have breakfast. We had a really nice view of Sabang Beach.
We stayed there until the 8th and then transferred to AAA. When we arrived back in Sabang, AAA was fully booked. Reynaldo’s became fully booked on the 8th so we didn’t really have a choice about moving (welcome to the high season… there’s a reason I recommend booking ahead of time this time of year). AAA doesn’t have the view, but then it was also substantially cheaper!
There are some really good restaurants in Puerto Galera. El Galleon Resort, home of Asia Divers, has a great breakfast buffet and we went there a few times. We often had lunch either at Tamarinds, which wasn’t far from the dive shop and had a great view, or at Papa Freds Steakhouse which had some nice lunch specials. For dinner, there was Atlantis Resort which has great food and service and Captain Greggs, which is another restaurant on the beach with a great view. Cheaper and also good was Tina’s Restaurant which was just below Reynaldo’s on the waterfront.
My personal favorite restaurant in Sabang is Vesuvio’s. They have a brick oven and make what I consider to be the best pizza in the Philippines! The restaurant used to be on the main street leading up from the pier but moved late last year. Walk up the street from the pier and turn left at the laundry, just in front of Tropicana Restaurant. Then straight a couple minutes walk at most and you will find it on the left. The kitchen is downstairs and dining is upstairs. Great selection of pizzas and they will make a custom pizza for you if you like. They also have great pasta.
We talked about going over to El Nido, but in the end, we opted to stay in Puerto Galera. One thing we had talked about doing that we had not done in February was rent motorbikes. They’re available for 500 pesos a day (around $10 bucks US). We made a visit to Tamaraw Falls and stopped and visited the ATM in Puerto Galera town on the way. The ATM at the bank in Sabang still does not accept debit or credit cards from foreign banks.
Ron left on the 12th but I decided to stay a bit longer not leaving until 18th. I took it easy and did only 11 dives. I ended up with only 24 dives this trip. Ron finished up with 50! Ron also became my first official student as a new scuba instructor. He completed his Advanced Open Water and Nitrox specialty.
As I finish this up I’m in my new apartment in Guam. I arrived on March 26th and I’ll write more about that and my plans here in my next post.